|
It is currently Wed Jun 19, 2013 5:51 pm
|
View unanswered posts | View active topics
 |
|
 |
|
|
icantdrift
|
Post subject: Posted: Sun Aug 24, 2008 9:57 pm |
| Salsa Rodeo |
 |
Joined: Fri Sep 03, 2004 1:03 pm Posts: 5885
|
just tore the car apart... it's going to be a bitch to straighten  . the strut tower is pushed over along with that whole side of the chassis a good bit. the strut tower is touching the brake master cylinder it's moved so much. the minor parts needed are new tierod ends, a swaybar endlink, left lower control arm, and TC rod. i'll have to fix the headlight tabs as they are smashed pretty bad. the back lip of the wheel is bent where it was pushed into the coilover but not too bad. both wheels on that side are scuffed on the outer lips pretty good. rear fender will need to be re-rolled since it pushed in the lip.
_________________
quazar311 wrote:
Quote: People go into debt for dumb shit.. this is not dumb.. this is going to be something that you will remember.
|
|
|
|
 |
|
down_shift
|
Post subject: Posted: Sun Aug 24, 2008 10:22 pm |
| Muscle Milk |
 |
Joined: Sat May 29, 2004 1:38 am Posts: 11736 Location: Beverly Hills
|
|
sucks man. hope you can get her straight again. that cars been through a lot. holler if you need anything.
_________________ ::::: understeer is definitely a crime - Colin McRae
|
|
|
|
 |
|
icantdrift
|
Post subject: Posted: Sun Aug 24, 2008 10:23 pm |
| Salsa Rodeo |
 |
Joined: Fri Sep 03, 2004 1:03 pm Posts: 5885
|
|
matt is going to hook up the LCA and spindle. if you guys have a stock endlink for the swaybar i could use one. the TC rod and rod ends i'll have to source.
_________________
quazar311 wrote:
Quote: People go into debt for dumb shit.. this is not dumb.. this is going to be something that you will remember.
|
|
|
|
 |
|
icantdrift
|
Post subject: Posted: Sun Aug 24, 2008 10:25 pm |
| Salsa Rodeo |
 |
Joined: Fri Sep 03, 2004 1:03 pm Posts: 5885
|
new super max angle front control arms  and what i believe actually caused the destruction 
_________________
quazar311 wrote:
Quote: People go into debt for dumb shit.. this is not dumb.. this is going to be something that you will remember.
|
|
|
|
 |
|
shawn shawn
|
Post subject: Posted: Sun Aug 24, 2008 10:30 pm |
| Hollasaurus Rex |
 |
Joined: Mon Feb 07, 2005 12:14 am Posts: 6945 Location: Bob Loblaw Lobs Law Bomb
|
icantdrift wrote: matt is going to hook up the LCA and spindle. if you guys have a stock endlink for the swaybar i could use one. the TC rod and rod ends i'll have to source. I will check on that for ya.
_________________
 
_team rowdy_
|
|
|
|
 |
|
icantdrift
|
Post subject: Posted: Sun Aug 24, 2008 11:13 pm |
| Salsa Rodeo |
 |
Joined: Fri Sep 03, 2004 1:03 pm Posts: 5885
|
metalmulishaS13 wrote: Worse case scenario if you do not have the parts in time, I have spl inner and outter tie rod ends and spl tension rods and stock end links for sway bar if you need them to be ready for November. Just let me know. your damn car better be ready for november, or i will come finish it for you and drive it in front of you while giggling like a schoolgirl.
_________________
quazar311 wrote:
Quote: People go into debt for dumb shit.. this is not dumb.. this is going to be something that you will remember.
|
|
|
|
 |
|
Inappropriate Chris
|
Post subject: Posted: Mon Aug 25, 2008 12:00 am |
| Past the Hazing |
 |
Joined: Tue Jan 31, 2006 11:32 pm Posts: 1001 Location: Peaking through the bushes
|
icantdrift wrote: metalmulishaS13 wrote: Worse case scenario if you do not have the parts in time, I have spl inner and outter tie rod ends and spl tension rods and stock end links for sway bar if you need them to be ready for November. Just let me know. your damn car better be ready for november, or i will come finish it for you and drive it in front of you while giggling like a schoolgirl. I have already said I wont be in the state for November, I am already bummed that I will be missing it. So if I can't make it and those pieces are what stops you from making it. You can have/use them or whatever.
_________________
|
|
|
|
 |
|
matts13
|
Post subject: Posted: Mon Aug 25, 2008 12:10 am |
| OK Finally Past the Hazing |
Joined: Mon Jan 09, 2006 8:31 pm Posts: 1914 Location: marietta
|
|
we are your only family son!
|
|
|
|
 |
|
|
 |
|
 |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|