Fuel rail!!!!!!

Tech mumbo-jumbo... not Gizmodo.

Moderators: charlie, darkducati

Post Reply
User avatar
s13driftertb
Ripe Meat
Posts: 171
Joined: Fri Aug 03, 2007 9:38 pm
Location: N' Ville

Fuel rail!!!!!!

Post by s13driftertb »

What is the freakin trick to getting these freakin injectors out of this freakin fuel rail?!?!?!?!?!?


Thank you for your help,

:oops:
User avatar
icantdrift
Salsa Rodeo
Posts: 5987
Joined: Fri Sep 03, 2004 1:03 pm

Post by icantdrift »

soak them with some kind of lube. they get pretty good and stuck over the years if they're never taken out. take off the top caps and spray some kind of lube to loosen up the orings then pry gently. i broke 3 of mine taking them out even after some lube.
User avatar
down_shift
Muscle Milk
Posts: 11882
Joined: Sat May 29, 2004 1:38 am
Location: Beverly Hills

Post by down_shift »

icantdrift wrote:...lube...lube...lube.
gratuitous
::::: understeer is definitely a crime - Colin McRae
User avatar
s13driftertb
Ripe Meat
Posts: 171
Joined: Fri Aug 03, 2007 9:38 pm
Location: N' Ville

Post by s13driftertb »

cool, I got them out, I scuffed up one or two of the edges, I hope that doesn't screw anything up.

The screws are the fun part!!! :evil:
matts13
OK Finally Past the Hazing
Posts: 1925
Joined: Mon Jan 09, 2006 8:31 pm
Location: Woodstick

Post by matts13 »

if you have a philliup plus they come out a lot better. that is why i sent you the screws from mine i knew you would have a hard time getting the screws out.
User avatar
s13driftertb
Ripe Meat
Posts: 171
Joined: Fri Aug 03, 2007 9:38 pm
Location: N' Ville

Post by s13driftertb »

matts13 wrote:if you have a philliup plus they come out a lot better. that is why i sent you the screws from mine i knew you would have a hard time getting the screws out.
thanks I stripped out two of mine.
Post Reply