Page 2 of 2

Posted: Fri Jun 04, 2004 10:42 am
by CodyW
unstable hybrids

Posted: Fri Jun 04, 2004 1:37 pm
by djdorifto
holycrap, i thought they wern't doing any more swaps?

Posted: Fri Jun 04, 2004 7:43 pm
by jo
The swap isn't brand new! It was done awhile ago.

Posted: Sat Jun 05, 2004 9:58 am
by CodyW
yup, i think it was done about 1.5 years ago.

Posted: Sat Jun 05, 2004 6:03 pm
by LOV2XLR8
very nice job on the swap it look very clean

i'm loving the sleeper look too!

Posted: Sat Jun 05, 2004 9:26 pm
by charlie
Cody,

I'm really sorry to hear about your unstable hybrid.<<heart monitor beeps>> I know kinda how it feels. <<beep beep>> One night I was just taking a nice casual drive to a friend's house (back when I had the AWD Talon) when the car <<beep! beep! beep!>>went "pop" and all of the gauges died. I was just driving normally and didn't know what had happened <<slower beeps>> but when I saw the steady trail of oil that followed my car off the road, I knew that was it. <<Flatline______________________________>>

My timing belt broke and took the engine with it. The guy behind me pulled over to check on me. He said that a big fireball shot out the back. All I know so far is that you had to be towed but I really hope that you aren't as bad off as I was. It was over a year before I got another car, but it was a WRX so whatever waiting period was worth it to me. So I guess the moral of the story is...

Things get better... and oh yeah, fuck the 4G63.

((uh oh, I think I can hear the HOO MAN coming for me....))

Posted: Sat Jun 05, 2004 11:39 pm
by djdorifto
fawk dude!!! am so sorry to hear that, i hope you get through it alright, good thing ur not alone in this, lots of friends near by to help ya out, to bad am not closer to help ya out bro!! Nissan forEvRa!!!!!!

Posted: Sun Jun 06, 2004 12:52 pm
by jo
Yes, we did tow the car out of the mountains, but it was still running!!!! When we pulled over it was completely out of oil [if anyone knows how 4 quarts can disappear in a week without a trace, let me know!] and it sounded like the pistons were slapping. We refilled her with oil, thanks to an awesome oil run by Mike and Ron, and drove her for a bit before deciding to let her rest and get towed home so as not to inflict any damage.

I think she'll be all good once she's checked out. And if it's major, at least the bottom end can be rebuilt nice and tough.

Posted: Sun Jun 06, 2004 1:25 pm
by CodyW
yup, we're all hoping for the best and i guess my plan for now is to call eagle in the morning and see about getting it up there for them to check it out. if i have to, i will build up the entire bottom end and make it even meaner, but it would be kinda nice if it's just the rod bearings or something simple like that.

Posted: Sun Jun 06, 2004 7:45 pm
by xonn
Codysan, Eagle is just a machine shop. They can probably listen to it and tell you what they think it is, but they won't pull the engine and out of the car. They're strictly a machine shop... If you have a garage at your disposal, I'd pull the oil pan off of it and take a look at the rod bearings and crank. If it turns out that the crank looks fine try putting a new set of rod bearings in it and see if the knocking goes away. The torque requirements for the rod bolts is 30 ft lbs. It'd be cheaper to try that and see if it behaves (40 - 60 dollars) vs. pulling the engine and rebuilding it (1500+ easy).

Posted: Sun Jun 06, 2004 7:47 pm
by xonn
I just checked on Nico. It's 28 - 33 ft lbs for the rod bolts. So 30 ft lbs. is a good number to go with.

http://www.nissaninfiniticlub.net/forum ... ngs+torque

Posted: Sun Jun 06, 2004 9:18 pm
by CodyW
ah, i wasn't aware of that. i do have a garage here in my apt so i might attempt to try that. thanks a bunch for digging up those specs for me too!

Posted: Mon Jun 07, 2004 3:04 am
by djdorifto
http://240sxforums.com/fsm/s14fsm/S14_SR20DET_FSM.pdf

here ya go, its the same as the S13SR some of the stuff hehe