CodyW wrote:my only suggestion would be to use the traditional logo for the address, something like this...

i totally agree.
that was my original idea, but I didn't have the logo with me at the time I did it. besides, it's pretty obvious that i didn't spend too much time on it....the boarder is way off center

so we'll go with that one, yes?

sounds good to me .

LET'S DO IT!!!
I like that one with the border and the URL.

WORD!!!

Oh yeah... the tent is 10x10'... so 10 feet across, and whatever the height ends up being is cool as long as the proportions are constrained.

ok, it looks like 120" by 34" (10ft x 2.8 ft) will be the correct porportions for that.
does that sound about right? (i suck at math, so there's a tolerable chance that it's wrong ).

sweet! cody, if you would...send me the file and I'll try to print it out tomorrow.
I believe your correct on the porportions. but if you're not, then I'll get it as close as I can. (making it atleast 10ft across).

*like the new sig!

thank you sir .

thanks man.

i haven't gotten a final price yet, but I believe it'll be between $3 and $4 a square foot. so:
120"x34" = 28sq ft x $3 = $84
120"x34" = 28sq ft x $4 = $112
give or take.

is everyone going to chip in? say $10 a piece or so?

andy, for future reference the seal is hot but what about an outline on the hachi? those corners disrupt the funk. how about throwing in some freemasonry stuff too, hehe.

The seal is too jumbled, it's got too much going on.

I voted for #4. It's got modern styling and is simple yet not boring.

The old english is a little tougher to read and a little busy.

Arcana wrote:The seal is too jumbled, it's got too much going on.

I voted for #4. It's got modern styling and is simple yet not boring.

The old english is a little tougher to read and a little busy.

true...i kinda agree. However, it has a Celtic feel to it which is a nice change IMO.

it's JDM or something .

oh, and i'm fine with throwing $10 in however i'm wondering if we might just wanna do this one a bit smaller to save money and then save up for a more versatile vinyl one later on (so we can have it at all the drift events outside and not worry about rain and stuff like that). just a thought, but any input is welcome.

celtic, jdm, long-armed greek....it's all the same

agreed. a small banner would be more cost effective. but either way is cool with me.

Yeah... I'm down with the smaller size... say... half that? 5 feet wide.
Hahaha... normally I would say "DOUBLE IT!"... but this time, I say "HALF IT!!!".
Bwaaahaha.

charlie wrote:andy, for future reference the seal is hot but what about an outline on the hachi? those corners disrupt the funk. how about throwing in some freemasonry stuff too, hehe.

Bwaaahaha!! I didn't even think about the freeMasonry stuff. HAHAHA!!
I'm still messing with it. That Hachi just ain't done to me.

BTW... If anyone can tell me where I vectorTraced that picture from, I'll give them a free shirt!!!