Whoot whoot



Everything fits fine, messured the length of the axles and it should work maybe i have to make some spacers but will work just waiting for the new wheel bearings to put in the r33 hubs!

Nice! Looks proper.

WHOA!!!!

Now i have some axles and diffs for the e36 left haha

Did you have to order some kind of custom bearings to fit the nissan outer hub to the bmw inner part? Or was it an off-the-shelf bearing that's not too hard to get a hold of?

You can source almost anything premade like that. Also, Andy, get all those axles!!!!

The R33 hub outer diameter is 43mm, there are different bearings for e36/e46 and i ordered the bearings for the 328i/325tds with an 42mm inner diameter. So i just have to machine the r33 hub, i think 1mm less shouldnt be too bad for the strength of the hub.

Have a question for ya. are these fairly common over there?



I am trying to find a set of EDM Levin headlights so that I can have the correct beam pattern.

Marlow asked me that in nashville, those are freakin rare here, i can watch out for a set of headlights.

The machined wheelhubs, still waiting for the wheel bearings...



some more fresh paint:



spent about 200bucks at the dealership for new bolts and nuts... dayum!

Bought the bearings at the dealership today didnt want to wait longer so car will be back on the wheels at the weekend!

YESSS!! That is awesome news!

andysapp wrote:YESSS!! That is awesome news!

Agreed. Cant wait to see more of this frankenawesome.

Thats the work from today, arms are back in, tomorrow i have to machine a centering spacer for the brake discs and drill the holes for the new pattern in it. Didnt work much on it today cause Charles KaKi NG came to hangout with TR Germany and i decided to set the aligment on his m3 cause it drove like shit...

Crazy! I've never met him, but he seems rad.