Page 1 of 3

KMS Competition at AMS Sept 15th.

Posted: Thu Aug 23, 2012 9:14 pm
by foilman
Who else is going to this event? KMS competition at AMS Setp 15th?

There was tons of track time at the last one and I have little doubt even those skipping the comp will get plenty of seat time. Super bonus is you don't need a cage for tandem.

http://kossmotorsports.com/kms-drift/km ... ng-events/" onclick="window.open(this.href);return false;

Re: KMS Competition at AMS Sept 15th.

Posted: Fri Aug 24, 2012 12:25 am
by andysapp
I want to, but I'm out of money right now. I really want to get my car to a body shop too, but I just don't have the coin right now.

Re: KMS Competition at AMS Sept 15th.

Posted: Fri Aug 24, 2012 12:58 am
by down_shift
has he dropped that point minimum crap to do the event?

Re: KMS Competition at AMS Sept 15th.

Posted: Fri Aug 24, 2012 1:32 pm
by foilman
down_shift wrote:has he dropped that point minimum crap to do the event?
This is not the final, it is an event to get those points, which I talked to him about relaxing at the last event and I think he realize they'll have to.

Re: KMS Competition at AMS Sept 15th.

Posted: Fri Aug 24, 2012 10:15 pm
by P.Haire
I need a second job.

Re: KMS Competition at AMS Sept 15th.

Posted: Sat Aug 25, 2012 3:33 am
by revel
i need to get my car running proper. to make my current setup work i would need a 30 spline count 31mm output flange. only way to get those is from a kouki s14, kouki 180sx, 97+r33, r34, or an s15. so only real hope is the kouki s14 since those made it to the states. outside of that i am basically screwed unless i buy a whole new LSD to fit the more common to USDM j30 29 spline count 30mm output flanges.

Re: KMS Competition at AMS Sept 15th.

Posted: Sat Aug 25, 2012 12:42 pm
by foilman
revel wrote:i need to get my car running proper. to make my current setup work i would need a 30 spline count 31mm output flange. only way to get those is from a kouki s14, kouki 180sx, 97+r33, r34, or an s15. so only real hope is the kouki s14 since those made it to the states. outside of that i am basically screwed unless i buy a whole new LSD to fit the more common to USDM j30 29 spline count 30mm output flanges.
Are you SURE about that? This is the FOERST I've heard different year US 240s have different spline shafts. They are different vlsd/open, but I thought all years the same.

Re: KMS Competition at AMS Sept 15th.

Posted: Sat Aug 25, 2012 1:45 pm
by andysapp
P.Haire wrote:I need a second job.
I'll give you a second handjob.

Re: KMS Competition at AMS Sept 15th.

Posted: Sat Aug 25, 2012 7:19 pm
by Dr. Marlow
Signed Up! :slayer:

KMS Competition at AMS Sept 15th.

Posted: Sun Aug 26, 2012 8:46 pm
by revel
Tony- usdm might be all the same. I am not 100% sure, but as for jdm pre 96 is 29 spline 30mm and post 96 is 30 spline 31mm

Re: KMS Competition at AMS Sept 15th.

Posted: Fri Oct 19, 2012 11:19 am
by Roadkill
The Road Course and Media Lot are an S 2 Practice day just like last time. KMS is running their competition separate from our thing. No points needed at all for practice. After the comp is over if time permits we will open the legends course to our guys and the Road Course and Media Lots to their guys.

There are still spots left but it will sell out as all S 2 Drift Events do.

https://www.facebook.com/events/289042491185098/" onclick="window.open(this.href);return false;

Re: KMS Competition at AMS Sept 15th.

Posted: Fri Oct 19, 2012 6:41 pm
by down_shift
thanks for clearing that up. I couldn't get a straight answer from koss on 240atl.

Re: KMS Competition at AMS Sept 15th.

Posted: Fri Oct 19, 2012 8:18 pm
by foilman
Reg'd... for what, I'm not sure.

KMS Competition at AMS Sept 15th.

Posted: Fri Oct 19, 2012 9:07 pm
by Treefish
down_shift wrote:thanks for clearing that up. I couldn't get a straight answer from koss on 240atl.
It was pretty straight forward bro

Re: KMS Competition at AMS Sept 15th.

Posted: Sun Oct 21, 2012 3:06 am
by down_shift
not really.