SR Vac lines....???

Tech mumbo-jumbo... not Gizmodo.

Moderators: charlie, darkducati

Post Reply
User avatar
s13driftertb
Ripe Meat
Posts: 171
Joined: Fri Aug 03, 2007 9:38 pm
Location: N' Ville

SR Vac lines....???

Post by s13driftertb »

I was reading on the HT site and it said to run the vacume line off the waste gate to a nipple on the IC pipe. Can I not just run it off a spot on the TB? There is no nipple on my FMIC pipeing.


Thanks
User avatar
s13driftertb
Ripe Meat
Posts: 171
Joined: Fri Aug 03, 2007 9:38 pm
Location: N' Ville

Post by s13driftertb »

oh, an dI'm using the AEM tru-boost controler too.
matts13
OK Finally Past the Hazing
Posts: 1925
Joined: Mon Jan 09, 2006 8:31 pm
Location: Woodstick

Post by matts13 »

it is better to get your air source to drive the wastgate closer to the turbo. things just work better. but if that is all you have it will work off the manifold.
User avatar
icantdrift
Salsa Rodeo
Posts: 5987
Joined: Fri Sep 03, 2004 1:03 pm

Post by icantdrift »

i always used the bottom vac nipple on the throttle body, no problems with it.
User avatar
s13driftertb
Ripe Meat
Posts: 171
Joined: Fri Aug 03, 2007 9:38 pm
Location: N' Ville

Post by s13driftertb »

Thanks guys, I think it would be hard to get a nipple put on the hot pipe so for now I'lll use the one off the tb from there to the AEM controler to the wasted gate....


hu hu I said hard and nipple....

:D
User avatar
P.Haire
Trunk Junk
Posts: 14396
Joined: Mon Sep 27, 2004 8:13 pm
Location: ZOO
Contact:

Post by P.Haire »

lolz!
tom is your car almost done?
and i'll sell you those wheels for really cheap if you still want them.
Image
please believe
Post Reply