wtb modded SR20 or 1jz
Moderators: charlie, darkducati, CodyW, Rhoad Racing
-
- Ripe Meat
- Posts: 179
- Joined: Thu Feb 05, 2009 3:28 pm
- Location: alpharetta
wtb modded SR20 or 1jz
like the title says. i need complete sr swap.
-
- Fresh Meat
- Posts: 18
- Joined: Sun Aug 17, 2008 10:31 pm
Re: wtb modded SR20 or 1jz
I got a modded SR20 I might wanna sell, PM me for more info,
ARP hardware top and bottom, Tomei valve springs, RAS, and 264 solid cams/lifters.
GT2871R w/ 650cc injectors, Peak Performance Manifold, AVCR boost controller, HKS actuator
Cosworth Head Gasket, Freddy intake manifold - port matched, New ACT HD clutch (6 puck sprung) installed with new"er" tranny less than 5k miles ago, runs and shifts smooth.
Would like to sell as complete package w/ Greddy downpipe, Skunk2 exhaust, hybrid dynamis intercooler kit, Greddy intake, etc.
As well as the engine harness fitted for S14 240sx chassis, Mine's tuned ECU, and Apexi AFC Neo.
Also have an aluminum driveshaft from Driveshaft Shop for non ABS S14's
This would be a full turn key setup, still have this sitting an S14 that was until recently my daily driver. About 10k miles on the setup since last rebuild, everything is tip top, makes around 330rwhp@18psi with a rich tune, could easily be taken up to 360 or maybe a little more with some extensive dyno time which I never did cause all I had was the AFC Neo,, never got around to getting an engine management setup.
If you want to hear it run or hell even drive it just hit me up, I don't plan to pull it until I find a buyer anyway.
Asking $4800 for entire setup including all electrical and driveshaft, full exhaust, intercooler, Koyo radiator, hoses, lines, etc.
ARP hardware top and bottom, Tomei valve springs, RAS, and 264 solid cams/lifters.
GT2871R w/ 650cc injectors, Peak Performance Manifold, AVCR boost controller, HKS actuator
Cosworth Head Gasket, Freddy intake manifold - port matched, New ACT HD clutch (6 puck sprung) installed with new"er" tranny less than 5k miles ago, runs and shifts smooth.
Would like to sell as complete package w/ Greddy downpipe, Skunk2 exhaust, hybrid dynamis intercooler kit, Greddy intake, etc.
As well as the engine harness fitted for S14 240sx chassis, Mine's tuned ECU, and Apexi AFC Neo.
Also have an aluminum driveshaft from Driveshaft Shop for non ABS S14's
This would be a full turn key setup, still have this sitting an S14 that was until recently my daily driver. About 10k miles on the setup since last rebuild, everything is tip top, makes around 330rwhp@18psi with a rich tune, could easily be taken up to 360 or maybe a little more with some extensive dyno time which I never did cause all I had was the AFC Neo,, never got around to getting an engine management setup.
If you want to hear it run or hell even drive it just hit me up, I don't plan to pull it until I find a buyer anyway.
Asking $4800 for entire setup including all electrical and driveshaft, full exhaust, intercooler, Koyo radiator, hoses, lines, etc.
-
- Ripe Meat
- Posts: 179
- Joined: Thu Feb 05, 2009 3:28 pm
- Location: alpharetta
Re: wtb modded SR20 or 1jz
Lol no not yet. I put my ls back in my car.
- HATERDAN
- Purple Drank
- Posts: 2106
- Joined: Mon Aug 02, 2004 10:25 am
- Location: in your sister
- Contact:
Re: wtb modded SR20 or 1jz
let me know if you still want one I know a dude up here that might have whatcha need.
-dan
- CodyW
- Slippery When Westicles
- Posts: 8549
- Joined: Fri Apr 30, 2004 11:44 am
- Location: emergency surgery in the studio
- Contact:
Re: wtb modded SR20 or 1jz
I'll selll my 1J if you wanna buy a 99 SC300 with it, haha.
-
- Ripe Meat
- Posts: 179
- Joined: Thu Feb 05, 2009 3:28 pm
- Location: alpharetta
Re: wtb modded SR20 or 1jz
Seems like alot of money for a Sr swap man. I'm sure its worth it, just not to me.
No sc's for me.
No sc's for me.
- revel
- Eet Bacon
- Posts: 7666
- Joined: Wed Jul 28, 2004 6:00 pm
- Location: DeepDishDreams&StretchedTireNaps
Re: wtb modded SR20 or 1jz
yea seriously?struka wrote:already?
- CodyW
- Slippery When Westicles
- Posts: 8549
- Joined: Fri Apr 30, 2004 11:44 am
- Location: emergency surgery in the studio
- Contact:
Re: wtb modded SR20 or 1jz
Everything is for sale for the right price .
Not actively trying to sell this one yet though, actually have some toys on the way so I should probably hang on to it long enough to put those on. Need to fix some general maintenance crap (power steering pump, battery) before I can really drive it around much though.
Not actively trying to sell this one yet though, actually have some toys on the way so I should probably hang on to it long enough to put those on. Need to fix some general maintenance crap (power steering pump, battery) before I can really drive it around much though.