Making space in the basement sale

[icantdrift]

S13 Silvia aero, special BG style. PM for dM price.


Super sturdy heavy duty unbreakable TC Rods $40


3" Exhaust flex $15/each
3" U bend (aluminized steel) $10


Daft Innovations swaybar spacers for LS/RB/JZ swaps for pan clearance $40


T25/T28 compressor outlet flange $5


Pair of 2.5" inlet exhaust tips (3" OD) $20



FSR Double pass radiator. I cut the bottom two rows off with intention of welding the tanks back shut and having a proper fitting radiator, but I ended up ordering a whole new custom unit from Griffin. All it needs is someone to tig the tanks back up and it's a proper working radiator again. About 27" wide, 18" high including the filler. Cooled my LS swap wonderfully. $40

[P.Haire]

i would like one of the flex things.

[icantdrift]

i would like one of the flex things.

I'll hang on to it for you until your next trip to ATL if you'd like.

[P.Haire]

thanks!

[Epik]

i would like one of the flex things.

I'll take the other one..shipped to 29588..pm me you paypal info

Thanks

[blink182house]

tension rods shipped to 38632?
also 3" U-bend

[kOOpA]

tension rods shipped to 38632?
also 3" U-bend

i'll pay somebody $5 to delete this post, and then i'll need to know how much for the tension rods shipped to 63141.

[icantdrift]

tension rods shipped to 38632?
also 3" U-bend

shipping is probably $10-15, have to see if I can fit them in a flat rate box.

[blink182house]

tension rods shipped to 38632?
also 3" U-bend

i'll pay somebody $5 to delete this post, and then i'll need to know how much for the tension rods shipped to 63141.

LAWLZ
na its all good koopa if you need them go for it, i was gunna slap them on the daily im building... with the money my credit company has provided me with for the time being LOL!


on that radiator does it just need the tanks rewelded or does a piece have to go all across the lower section? i'm really interested i'd just have to drop it off at the shop next door to weld it up as i'm not able to do that stuff

[icantdrift]

tension rods shipped to 38632?
also 3" U-bend

i'll pay somebody $5 to delete this post, and then i'll need to know how much for the tension rods shipped to 63141.

LAWLZ
na its all good koopa if you need them go for it, i was gunna slap them on the daily im building... with the money my credit company has provided me with for the time being LOL!


on that radiator does it just need the tanks rewelded or does a piece have to go all across the lower section? i'm really interested i'd just have to drop it off at the shop next door to weld it up as i'm not able to do that stuff

The tanks will only need to be plated shut at the ends to be functioning. You could also have a piece of flat bar welded across the bottom between the tanks to clean up the look where the fins were cut and give you a better mounting surface at the bottom.

[blink182house]

Hey man can you shoot me a price on the radiator and ubend to 38671? THanks!