Godspeed S13 FLCA w/QA1 bearing mod

Do you have a part for sale? Don't post it here. Trust me.

Moderators: charlie, darkducati, CodyW, Rhoad Racing

Post Reply
User avatar
icantdrift
Salsa Rodeo
Posts: 5987
Joined: Fri Sep 03, 2004 1:03 pm

Godspeed S13 FLCA w/QA1 bearing mod

Post by icantdrift »

I followed Def's thread on nissanroadracing.com on how to do these but please note that they still have the GS inner pivot bearing. I've had to re-use one set of the inner misalignment spacers so they are missing one pair (see 3rd photo).

Included are the arms fitted with the QA1 outer bearings, 3/4" grade 8 bolts, misalignment spacers, shim spacers, all associated TC rod bolts and hardware. I will also include the extra 3/4" mechanical lock nuts that I have and spacers/shims. Optional but available, the drilled out stock S13 front spindles. Otherwise you will need to drill out the ball joint hole in your stock spindles to 3/4" holes. These give basically unlimited roll center correction because if what's in there isn't enough for you, just pick up some longer bolts and run more spacers.
SOLD SOLD SOLD
Post Reply