I just got word back from the machine shop that my bottom end will need sleeves, and its just not worth it to me, eff all that noise. Therefore will be parting out the entire motor. NO INJECTORS, NO MAF, NO ECU, NO TURBO, NO OIL PICKUP, NO UPPER WATER NECK.
here is the short/simple list of whats left:
*Head/cams/cam gears/vtv selenoid/ complete head with slight detonation damage to casting (150+ship complete)
*Block (needs sleeves) (125+ship)
*ARP Headstuds with 4000 miles on them ($75 shipped)
*Crank/rods bearings (all in great shape) ($150+ship)
*Cam Angle Sensor (60+ship)
*Ignitor (50+ship)
*IACV (50+ship)
*Coil packs 4x (75+ship)
*Clutch/flywheel (115+ship)
*Starter (65+ship)
*Power Steering pump (50+ship)
*Throttle body/TPS (65+ship)
*Intake Manifold (45+ship)
*Alternator (70+ship)
*Exh manifold (35+ship)
*Oil pump/front cover (75+ship)
*Timing chain/guides/tensioners (65+ship)
*S13 SR A/C parts...compressor/bracket/hardware/tensioner pulley (60+ship)
Everything is priced with ZT/DM discounts under what I have on other forums, and I'll take care of ya on stuff if you wanna buy a few pieces.
I will make a more comprehensive list with pics soon, but post up if you are needing anything and make an offer.
FS: S14 SR20DET Parting out. (all engine parts)
Moderators: charlie, darkducati, CodyW, Rhoad Racing
Re: FS: S14 SR20DET Parting out. (all engine parts)
$4.50 for it all, and you buy me a double cheese burger