STi Brembo setup for s-chassis

Do you have a part for sale? Don't post it here. Trust me.

Moderators: charlie, darkducati, CodyW, Rhoad Racing

Post Reply
User avatar
icantdrift
Salsa Rodeo
Posts: 5987
Joined: Fri Sep 03, 2004 1:03 pm

STi Brembo setup for s-chassis

Post by icantdrift »

STi Brembo setup for S-chassis. Includes brackets (an early set made by Manonegra on Zilvia), 2007 Brembo STi calipers, Carbotech XP10 pads (70% left), Centric Evo 8 rotors (used one track day, bedded with carbotechs), stainless braided lines. One hole stripped on one of the brackets so I thread-serted all of the holes, only problem was I tapped one at a very slight angle so you have to thread that one most of the way in before you can start the bottom bolt through the spindle. I've run them for several years this way with no strength/loosening issues whatsoever. $1100 shipped obo. Might be willing to split up brackets/calipers for the right offer.
Image
Image
Image
Image
Post Reply