1993 Lexus GS300 drift car

[Epik]

I've decided after 7 years of owning this car that it's time to move on.
I havent driven it on the street in a year, and removed the tags, but it has a GOOD TITLE.. no salvage.. no leins.. title in hand.

1993 GS300 drift racecar
-Fully rollcaged with door bars.
-caged radiator support
-Stitch welded full unibody and underhood
-8 gallon fuel cell with 255 inline walbro pump
-Sparco Evo2 drivers seat (FIA), FX Racing passenger seat (non-FIA)
-Crow 5 pt harnesses on both seats
-Dash has been dyed dark blue
-Saga guages for boost, coolant and a tach fitted into the stock tach location in the dash
-Supra TT front calipers and crossdrilled rotors, 2 new GS rear calipers and crossdrilled rotors
-new GS brake master cylinder
-stainless braided brake lines
-Willwood hydraulic handbrake
-Kaaz 2 way LSD
-rear fenders rolled and pulled about 25mm
-all fuse boxes are inside the passnger compartment now.
-new steering rack, inner and outer tie rods
-RacingLogic coilovers.. need rebuilt

I have 2 incomplete bodykits.
-genuine Inspection sides and rear.. needs to be freshened up
-Admiration style front and sides, rear is in 3 pcs..
-genuine Inspection lip wing mounted on Aristo trunk
-comes with either GS300 or Aristo trunk (center) garnish
-sunroof deleted with carbonfiber sheet

body kit(s) is cracked several places, but can be fixed

Car is wearing 18x9.5 +25 Enkei PKR right now..white, with polished lip (edge)
they can go with the car.. wont fit my new project

i'm sure there is much much more that i'm forgetting.. This car does NOT include the engine and tranny. This will be a ROLLER.

Will ship if buyer arranges it, or pick up in Myrtle Beach, SC. Will deliver up to 250 miles from 29588 for gas money.

PM or email JDM2ner at aol.com for more pics. I have done EVERYTHING on this car myself and it is well documented.

stitchweld/front caging in progress

wire stripping/blue dash/fusebox relocation

the bad..

at work taking a break

in Atlanta

someone needs to finish this car.. i was so close but have no time anymore. hate to see her go.

$4000.00 obo

[andysapp]

[Dr. Marlow]

[Epik]

i gotz planz guys.

see it is being sold as a rolling chassis..

[andysapp]

Oooooh. I see what you did there.

But seriously... I can never look at this car with anyone else behind the wheel.
I'm SAD to see this go, man. Really sad.

BUT - I know you're next project will be equally as EPIK.

[Lightning]

noooooo!

I was wanting to tandem someday with it.....

[Epik]

Oooooh. I see what you did there.

But seriously... I can never look at this car with anyone else behind the wheel.
I'm SAD to see this go, man. Really sad.

BUT - I know you're next project will be equally as EPIK.

thanks Andy.. i did a lot of learning in this car. time to pass the torch

[jsquared]

OG Atlanta big body, RIP

[Pittsy]

This makes me .


But the idea of a new project for you makes me .

[down_shift]

hate to see it never 100% finished. OG.

good luck with the S13 project.

[Epik]

no s13 here..

[Lightning]

another 4-dr big body?

[Epik]

mmmm.. couulllddd be. but not a GS

[Dr. Marlow]

impala ss?

[JJ Alfano]

Good luck with the sale! I saw this car earlier this Summer and I admire the originality and creativity!

Willing to part the wheels seperate?