yay!!! new stuff on the way for my 14!

CodyW · Post by **CodyW** » Thu May 12, 2005 6:03 pm

in honor of my birthday, i decided i'd go ahead and get some of my suspension stuff out of the way and just ordered a set of secchi TC rods and a projectnissan torque dampner. everyone seems to be sold out of tein TC rods so i wen't with these as i've heard quite a bit of good stuff on them and they were $40 less (plus free shipping). the torque dampner should also reduce the chance of my manifold cracking and possibly help my rattling exhaust problem. now i just need some swaybars, rear upper control arms, and maybe a set of kei office coilovers and i'll be set

Zach · Post by **Zach** » Thu May 12, 2005 6:07 pm

Awesome, congratulations on the new parts also Happy Birthday, make it a good one

-Zach

ELmeano · Post by **ELmeano** » Thu May 12, 2005 6:09 pm

sweet they got those same parts by hotchkis that i want for my car, well not the dampner lol. Congrats man, and happy bday!!!!!

CodyW · Post by **CodyW** » Thu May 12, 2005 6:13 pm

thanks everyone! and it was actually already a good one (it was last friday) but i couldn't have asked for anything better than spending it with a ton of awesome people and watch some of the best sliding i've seen

.

AadosX · Post by **AadosX** » Fri May 13, 2005 12:35 am

Woot! congrats! Now get some rucas! Hehe.

revel · Post by **revel** » Fri May 13, 2005 4:25 pm

you shoulda told me i missed your b-day on day2 of FD. sorry i missed it. well happy belated bday mr cody. enjoy your parts when they get there.....what am i saying.....i know you will!

what size rear sway is on there now?

Post by **andysapp** » Fri May 13, 2005 4:39 pm

Heck yes! Those parts look sweeet!
Birfdays RULE!!!

CodyW · Post by **CodyW** » Fri May 13, 2005 5:55 pm

heck yes!

oh, and i'm really not sure what size it is stock, i'll have to check sometime. i want some of the nice tanabe ones though

.

217zenki · Post by **217zenki** » Sun May 15, 2005 2:44 am

Sounds good , If i was u i wouldnt worry about a front sway bar I'd get the tanabe rear drift spec one its like 35mm thats what i got .....Also j-spec has the rear seat belt tie bars for s14 right now real cheap only place Ive ever seen them fro the s14....Check it out.

CodyW · Post by **CodyW** » Mon May 16, 2005 3:03 pm

yea, i think the rear tanabe will soon be on the way (i wanna get one here before the untouchable in june). also, my stuff came in today (i've yet to install it) and i also picked up a nice pair of S03's from GT

. not sure how those will slide (supposed to be some of the grippier tires around), but i might toss them up front and see how it goes. now i really need 2 more 350 wheels though.

ELmeano · Post by **ELmeano** » Mon May 16, 2005 4:01 pm

post pics after install. S03 are some bad azz tires. Sweet pick up

CodyW · Post by **CodyW** » Mon May 16, 2005 4:08 pm

well as my luck would typically go, it doesn't look like the 5 minute engine dampner install will go as planned. i just went down to put it on and it appears that 1 of the strut tower bolts is f'd up (it will turn but won't come off) and the actual dampner won't clear my hot pipe

. looks like a little ghetto fabrication will be in the works for this weekend.

ELmeano · Post by **ELmeano** » Mon May 16, 2005 4:20 pm

its all good. We all got some ghetto in our cars somewhere-lol

icantdrift · Post by **icantdrift** » Mon May 16, 2005 6:37 pm

i just ordered a new toy for my car... can't wait for it to show up

.

ELmeano · Post by **ELmeano** » Wed May 18, 2005 11:11 am

gonna pick up my shift kit this weekend, see wat that does.