2008 Nopi-Drift Rules?
Moderators: andysapp, charlie, CodyW, darkducati
lol @ Deagle. Ideally, i'll end up with a compact or subcompact single stacked .40 for my conceal and carry. But for now, being cheap as hell, i love shooting my 12g and my Browning .22 semi-auto rifle. Cant beat it for fun factor.
But Erin, tell me more about this MP5 .22 gun. that sounds fucking badass!!!!
I think i may actually look into getting that P22, it'd be a good compliment with my 12g. Once i get the mag capacity out to 7or8 +1 and the barrel down to a 24" or 20", i'll be set for a while.
But Erin, tell me more about this MP5 .22 gun. that sounds fucking badass!!!!
I think i may actually look into getting that P22, it'd be a good compliment with my 12g. Once i get the mag capacity out to 7or8 +1 and the barrel down to a 24" or 20", i'll be set for a while.
- CodyW
- Slippery When Westicles
- Posts: 8581
- Joined: Fri Apr 30, 2004 11:44 am
- Location: emergency surgery in the studio
- Contact:

http://atlanticfirearms.com/programming ... Prodid=477
and
http://ar15.com/forums/topic.html?b=6&f=11&t=220562
apparently it's been backordered for ages though, and i don't think very many have actually been shipped over here. looks cool though!
Thats awesome lol
Hey Cody, so you seem to be pretty keen at modding guns, can you help me find an 8+1 magazine tube extension for my Mossberg 500. I THINK the Mossberg 590 parts will fit it as well. I would think that someone would make one, since the 500 is their base model gun, and the same one that they modify for Military and Police use. But i cant seem to find anything for it besides stocks, and i dont want to worry about that until I increase capacity.
Hey Cody, so you seem to be pretty keen at modding guns, can you help me find an 8+1 magazine tube extension for my Mossberg 500. I THINK the Mossberg 590 parts will fit it as well. I would think that someone would make one, since the 500 is their base model gun, and the same one that they modify for Military and Police use. But i cant seem to find anything for it besides stocks, and i dont want to worry about that until I increase capacity.
Because i dont just want to kill 1 personStLCankles wrote:why you need a larger compacity for shell holding kyle? learn to be a good shot, cause then you only really need one shell.
and because it looks badass having your magazine match or near match your barrel length.
- CodyW
- Slippery When Westicles
- Posts: 8581
- Joined: Fri Apr 30, 2004 11:44 am
- Location: emergency surgery in the studio
- Contact:
lol, i like the reasoning.
haven't done a ton of shotgun research, but found this in my quick search: http://www.tjgeneralstore.com/magazine_extensions.htm (although it doesn't actually list the 500, so it might be of no value).
next, i found this little blurb on this site which talks a bit about adding an extensison to a 500: http://www.tacticalshotgun.ca/content_n ... 0_590.html
not sure if any of this is remotely helpful (from what i quickly gathered, it seems like it might be a pain to do?), but perhaps it's some help. i'd also reccomend searcing around the AR15 forums (their tactical shotgun subforum is here: http://ar15.com/forums/forum.html?b=6&f=1), and the also have a good equipment exchange where you can sometimes find lots of stuff. good luck with the search though!
haven't done a ton of shotgun research, but found this in my quick search: http://www.tjgeneralstore.com/magazine_extensions.htm (although it doesn't actually list the 500, so it might be of no value).
next, i found this little blurb on this site which talks a bit about adding an extensison to a 500: http://www.tacticalshotgun.ca/content_n ... 0_590.html
also found this topic on AR15 forums: http://ar15.com/forums/topic.html?b=6&f=1&t=234900 (mind you, i'm not actually reading everything, but just posting anything that seems mildly related)Adding additional magazine capacity to a mossberg is a different story. While our test gun came with an extended magazine tube and consequently an 8+1 capacity, it is all once piece and as such requires a different barrel setup as compared to the regular mossberg 500/590 series. On this particular setup the barrel is attached to the receiver by means of a cap screwed onto the end of the magazine tube (quite like that on the 870). In contrast, on the regular 500/590 series a lug extends beneath the barrel and holds the barrel to the gun by means of a locking nut. The geometry of the lug is such that it is impossible to add a magazine extension. If you want greater magazine capacity your only option is to go with a 590 model that has the extended tube barrel geometry, such as our 590 special purpose test gun or the 590A1.
not sure if any of this is remotely helpful (from what i quickly gathered, it seems like it might be a pain to do?), but perhaps it's some help. i'd also reccomend searcing around the AR15 forums (their tactical shotgun subforum is here: http://ar15.com/forums/forum.html?b=6&f=1), and the also have a good equipment exchange where you can sometimes find lots of stuff. good luck with the search though!
- icantdrift
- Salsa Rodeo
- Posts: 5987
- Joined: Fri Sep 03, 2004 1:03 pm
Zenkis14 wrote:Because i dont just want to kill 1 personStLCankles wrote:why you need a larger compacity for shell holding kyle? learn to be a good shot, cause then you only really need one shell., i want to kill 9 people all in the same room
![]()
and because it looks badass having your magazine match or near match your barrel length.
just make your barrel really short then
- POOPscandal
- Taco Bar Extraordinaire
- Posts: 4360
- Joined: Tue Dec 07, 2004 12:59 am
- Location: !black emperor
zombies.StLCankles wrote:why you need a larger compacity for shell holding kyle? learn to be a good shot, cause then you only really need one shell.
get this:

i'm preparing for zombie apocalypse. me and cody have got our house pretty well armed. how do you think you'll fare? i think we should have a set dM rendezvous point from which we will move north where zombies will freeze in the winter time and give us time to recover and prepare for zombie thawing/killing in spring. yeah, i think about this a lot.
Superb Tough Highest Performer Driven to Lifestyles Unimaginable

PHOTOBLARG!
NEW EXCITING BLARG!

"thanks man, I didn't do it, but I'm a fan of apple penis" -
internet

"thanks man, I didn't do it, but I'm a fan of apple penis" -
- icantdrift
- Salsa Rodeo
- Posts: 5987
- Joined: Fri Sep 03, 2004 1:03 pm
driftPANDAspl wrote: i think we should have a set dM rendezvous point from which we will move north where zombies will freeze in the winter time and give us time to recover and prepare for zombie thawing/killing in spring. yeah, i think about this a lot.
wouldn't it be good to destroy masses of zombies while frozen?
i think the redezvous could be jersey, not even the zombies want to go there so it would be a good safe zone.
driftPANDAspl wrote:zombies.StLCankles wrote:why you need a larger compacity for shell holding kyle? learn to be a good shot, cause then you only really need one shell.
get this:
i'm preparing for zombie apocalypse. me and cody have got our house pretty well armed. how do you think you'll fare? i think we should have a set dM rendezvous point from which we will move north where zombies will freeze in the winter time and give us time to recover and prepare for zombie thawing/killing in spring. yeah, i think about this a lot.
ill be fine, ive got enough bullets and gun to last through spring/summer. oh and as for the dM meeting spot, im suggesting stl, cause we have these guys here
http://www.zombiehunters.org/
- down_shift
- Muscle Milk
- Posts: 11892
- Joined: Sat May 29, 2004 1:38 am
- Location: Beverly Hills
Damnit, i've pretty much determined that the 500 is not extendable at all, and my best bet would be to just buy the 590A1 lol. Thats not gonna happen. So i hope i never have to blast any more than 6 people lol, i'll get get a shortened 20" or 24" barrel, and call it a day, then start saving for the hand gun.



