Page 2 of 2
Posted: Thu Nov 08, 2007 8:26 pm
by DJones
GTEAST wrote:I'm still trying to get to your level David, but it's getting closer!
awww
I'm tryng to get to "martymartymarty.net, Sapp, Erin" level. ...one of these days.
Posted: Thu Nov 08, 2007 11:20 pm
by Frosty_SPL
I reaaaaallllyyy want to track my 240. Im too cheap to buy new pads and rotors tho.
Posted: Thu Nov 08, 2007 11:27 pm
by icantdrift
Frosty_SPL wrote:I reaaaaallllyyy want to track my 240. Im too cheap to buy new pads and rotors tho.
pads and rotors are the cheapest part.
Posted: Thu Nov 08, 2007 11:32 pm
by down_shift
Frosty_SPL wrote:I reaaaaallllyyy want to track my 240. Im too cheap to buy new pads and rotors tho.
forget project Mu and Endless for a minute and just hit up NAPA.
Posted: Thu Nov 08, 2007 11:38 pm
by matts13
you need a lot more that just that
Posted: Fri Nov 09, 2007 4:49 am
by P.Haire
bull, i tracked my 240 on stock rotors and hawk pads. the only problem i had was slow ass mustangs in front of me.
Posted: Fri Nov 09, 2007 1:28 pm
by Zach
P.Haire wrote:bull, i tracked my 240 on stock rotors and hawk pads. the only problem i had was slow ass mustangs in front of me.
Yeah I'd say at least get good pads and you should be alright
Posted: Fri Nov 09, 2007 2:08 pm
by icantdrift
matts13 wrote:you need a lot more that just that
not with a stock ass KA you don't.
Posted: Fri Nov 09, 2007 2:31 pm
by P.Haire
exactly. stock ass KA ftw!
Posted: Fri Nov 09, 2007 2:32 pm
by matts13
belts that are not cracked and rad hose that are in good shape are a must!
Posted: Fri Nov 09, 2007 2:46 pm
by GTEAST
Those "slow ass mustangs" were pulling a couple of plug wires so you would not feel sooo slow!
Posted: Fri Nov 09, 2007 4:45 pm
by andysapp
Hahaha!
Posted: Fri Nov 09, 2007 5:52 pm
by P.Haire
actually i think they were to afraid of chipping their paint to go over 70.
Posted: Thu Nov 15, 2007 11:31 pm
by kalifornia087
EK9 > 240s and mustangs.
Im totally down for a track day in my daily. I will get raped in the straights but run corners fearlessly.
Posted: Fri Nov 16, 2007 7:29 pm
by Frosty_SPL
matts13 wrote:belts that are not cracked and rad hose that are in good shape are a must!
oohhh yea, forgot about that one.