Sr Trany help please...
Moderators: charlie, darkducati
- s13driftertb
- Ripe Meat
- Posts: 171
- Joined: Fri Aug 03, 2007 9:38 pm
- Location: N' Ville
Sr Trany help please...
This is my FOERST auto to manual transmission swap.
Do you need any of the sensors pluged in for the car to run? None of the wires reach to the sensors except for the speed sensor and that does me no good until I get a DOHC gauge cluster.
While I'm at it will the oil light in the SOHC cluster work with the SR? I of course don't want to start the car with out oil pressure.
Thanks for the help.
Do you need any of the sensors pluged in for the car to run? None of the wires reach to the sensors except for the speed sensor and that does me no good until I get a DOHC gauge cluster.
While I'm at it will the oil light in the SOHC cluster work with the SR? I of course don't want to start the car with out oil pressure.
Thanks for the help.
most people only run the speed sensor on their race cars. so if you don't want revers lights and 5th gear sensor you will be fine. as for the oil light not sure if they are the same would amagine they are. all the sensor is is grounded under 3ish psi. i would suggest a after market oil gauge over the stock one.
- s13driftertb
- Ripe Meat
- Posts: 171
- Joined: Fri Aug 03, 2007 9:38 pm
- Location: N' Ville
yeah when I get some cash I'm going to expand my gauge collection. I have boost gauge and AFR (auto meter) along with AEM boost gauge/boost controller
I'm not to worried about the speedometer working or the reverse lights. What does the "5th gear" sensor do?
cuz it would be way cool if that British car show came on while I was driving. sorry I retarded.
I'm not to worried about the speedometer working or the reverse lights. What does the "5th gear" sensor do?
cuz it would be way cool if that British car show came on while I was driving. sorry I retarded.
- POOPscandal
- Taco Bar Extraordinaire
- Posts: 4360
- Joined: Tue Dec 07, 2004 12:59 am
- Location: !black emperor
what i've come to find out from a certain roommate is that the correct answer for any kind of SR/KA tranny problem is to get a Z32 tranny so that it doesn't blow up every other week
Superb Tough Highest Performer Driven to Lifestyles Unimaginable
PHOTOBLARG! NEW EXCITING BLARG!
"thanks man, I didn't do it, but I'm a fan of apple penis" - internet
PHOTOBLARG! NEW EXCITING BLARG!
"thanks man, I didn't do it, but I'm a fan of apple penis" - internet
- s13driftertb
- Ripe Meat
- Posts: 171
- Joined: Fri Aug 03, 2007 9:38 pm
- Location: N' Ville
do you just have to change the bell housing, or swap the guts from the Z32 to the SR?driftPANDAspl wrote:what i've come to find out from a certain roommate is that the correct answer for any kind of SR/KA tranny problem is to get a Z32 tranny so that it doesn't blow up every other week
I'm worried about the 5th gear sensor.... all those 5th gear drifts... I may not have enough speed. ha ha he....
- POOPscandal
- Taco Bar Extraordinaire
- Posts: 4360
- Joined: Tue Dec 07, 2004 12:59 am
- Location: !black emperor
s13driftertb wrote:do you just have to change the bell housing, or swap the guts from the Z32 to the SR?driftPANDAspl wrote:what i've come to find out from a certain roommate is that the correct answer for any kind of SR/KA tranny problem is to get a Z32 tranny so that it doesn't blow up every other week
I'm worried about the 5th gear sensor.... all those 5th gear drifts... I may not have enough speed. ha ha he....
sammy was saying you send your bellhousing to get modified by some dude, get an adapter plate, and a (i think custom) driveshaft. something like a grand or so for the setup (w/ tranny?). its all heresay to me, so don't get pissed off if i'm totally off on what needs to be done and how much it costs. all i know is that z32 tranny blow up less.
Superb Tough Highest Performer Driven to Lifestyles Unimaginable
PHOTOBLARG! NEW EXCITING BLARG!
"thanks man, I didn't do it, but I'm a fan of apple penis" - internet
PHOTOBLARG! NEW EXCITING BLARG!
"thanks man, I didn't do it, but I'm a fan of apple penis" - internet
Send your bellhousing to Mazorx www.mazworx.com . He has an entire kit for the Z32 tranny into a 240. You can get a drive shaft from The Driveshaft Shop http://driveshaftshop.com .driftPANDAspl wrote:s13driftertb wrote:do you just have to change the bell housing, or swap the guts from the Z32 to the SR?driftPANDAspl wrote:what i've come to find out from a certain roommate is that the correct answer for any kind of SR/KA tranny problem is to get a Z32 tranny so that it doesn't blow up every other week
I'm worried about the 5th gear sensor.... all those 5th gear drifts... I may not have enough speed. ha ha he....
sammy was saying you send your bellhousing to get modified by some dude, get an adapter plate, and a (i think custom) driveshaft. something like a grand or so for the setup (w/ tranny?). its all heresay to me, so don't get pissed off if i'm totally off on what needs to be done and how much it costs. all i know is that z32 tranny blow up less.
- s13driftertb
- Ripe Meat
- Posts: 171
- Joined: Fri Aug 03, 2007 9:38 pm
- Location: N' Ville
- s13driftertb
- Ripe Meat
- Posts: 171
- Joined: Fri Aug 03, 2007 9:38 pm
- Location: N' Ville