• Fuel rail!!!!!!

Posted: **Tue Nov 06, 2007 9:27 pm**

What is the freakin trick to getting these freakin injectors out of this freakin fuel rail?!?!?!?!?!?

Thank you for your help,

Posted: **Tue Nov 06, 2007 10:25 pm**

soak them with some kind of lube. they get pretty good and stuck over the years if they're never taken out. take off the top caps and spray some kind of lube to loosen up the orings then pry gently. i broke 3 of mine taking them out even after some lube.

Posted: **Tue Nov 06, 2007 10:56 pm**

icantdrift wrote:...lube...lube...lube.

gratuitous

Posted: **Tue Nov 06, 2007 11:54 pm**

cool, I got them out, I scuffed up one or two of the edges, I hope that doesn't screw anything up.

The screws are the fun part!!!

Posted: **Wed Nov 07, 2007 12:01 am**

if you have a philliup plus they come out a lot better. that is why i sent you the screws from mine i knew you would have a hard time getting the screws out.

Posted: **Sat Nov 10, 2007 5:06 pm**

matts13 wrote:if you have a philliup plus they come out a lot better. that is why i sent you the screws from mine i knew you would have a hard time getting the screws out.

thanks I stripped out two of mine.