clutchkick
Moderators: charlie, darkducati
clutchkick
hi,
I was wondering how much rpm before the revlimiter you usually are kicking the clutch to initiate the drift
greets
I was wondering how much rpm before the revlimiter you usually are kicking the clutch to initiate the drift
greets
![Image](http://i844.photobucket.com/albums/ab4/abactus/random%20stuff/bulletsig1.jpg)
-
- Stale Meat
- Posts: 249
- Joined: Sun Oct 12, 2008 10:13 pm
- Location: Douglasville, GA
- Contact:
I don't do it often, however with the last few events, I've been using it more and more.
I use it around 3-4k, keeping in mind that my car only revs to 8 but the limiter kicks in at 6500.
Even if I could use the full rev band, I'd imagine kicking it between 3-5k would be optimal on my car. I can clutch kick pretty low and have it work (like 1400-2000) but that's mostly the car's motor kicking in at that point.
YMMV!
-Dave
I use it around 3-4k, keeping in mind that my car only revs to 8 but the limiter kicks in at 6500.
Even if I could use the full rev band, I'd imagine kicking it between 3-5k would be optimal on my car. I can clutch kick pretty low and have it work (like 1400-2000) but that's mostly the car's motor kicking in at that point.
YMMV!
-Dave
![Image](http://www.nightmajik.net/dadamsbanner.jpg)
I am, the most interesting man in the world.
-
- Stale Meat
- Posts: 249
- Joined: Sun Oct 12, 2008 10:13 pm
- Location: Douglasville, GA
- Contact:
He does, like a mad man, I love watching him drive too, and the sound is amazing.Maudite wrote:WOW!!!
back on topic, I think Andy just clutch kicks all the damn time, nonstop.
Dave Jones also clutch kicks a bunch
I thought it did, my tachometer goes to 8 but my factory rev limit is at 6500. I can phrase things oddly sometimes, my bad.martymartymarty.net wrote:
Ummm, that makes sense?
![Image](http://www.nightmajik.net/dadamsbanner.jpg)
I am, the most interesting man in the world.
-
- Not Really Past the Hazing
- Posts: 1296
- Joined: Wed Dec 08, 2004 9:13 am
- Location: Lawrenceville, GA
uhhhh Dave, that didn't make sense.
...and to answer the question, you can clutch kick whenever you feel the need. There's no point in clutch kicking if your car is on the rev limiter, and if my car is at low revs, I will hold the clutch in a little longer to let the revs build more (so when something breaks, it breaks big)
![Confused :?](./images/smilies/icon_confused.gif)
...and to answer the question, you can clutch kick whenever you feel the need. There's no point in clutch kicking if your car is on the rev limiter, and if my car is at low revs, I will hold the clutch in a little longer to let the revs build more (so when something breaks, it breaks big)
-
- Stale Meat
- Posts: 249
- Joined: Sun Oct 12, 2008 10:13 pm
- Location: Douglasville, GA
- Contact:
-
- Stale Meat
- Posts: 249
- Joined: Sun Oct 12, 2008 10:13 pm
- Location: Douglasville, GA
- Contact:
Yea, I bumped it down to 8500.
To answer the OP's question, there really is no set RPM that you should clutch kick. Like Djones said, just make sure you're not on the limiter when you do clutchkick. That would be useless.
And dadams. Just because your mustang tach goes to 8000, doesn't mean it revs to 8000. My speedo in my Miata goes to 180, but my Miata only tops out at 168. Go figure.![Razz :P](./images/smilies/icon_razz.gif)
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
To answer the OP's question, there really is no set RPM that you should clutch kick. Like Djones said, just make sure you're not on the limiter when you do clutchkick. That would be useless.
And dadams. Just because your mustang tach goes to 8000, doesn't mean it revs to 8000. My speedo in my Miata goes to 180, but my Miata only tops out at 168. Go figure.
![Razz :P](./images/smilies/icon_razz.gif)
- Dr. Marlow
- Salsa Rodeo
- Posts: 5507
- Joined: Mon Feb 27, 2006 3:51 pm
- Location: Chambodia
-
- Stale Meat
- Posts: 249
- Joined: Sun Oct 12, 2008 10:13 pm
- Location: Douglasville, GA
- Contact:
Really, wow, there's so much I have yet to learn about the inner workings of cars. I'm learning slowly but surely. Thanks for clearing that up, martymartymarty.net. I assumed that unless built to rev high, my engine would probably not produce much power up there anyway, even if I flashed and reset the rev limit to 8k. It'd probably just break something. It's not my focus anyway, at least not in that car. Power is fine, it's driver/suspension I'm worried about.
Maudite, did the car produce power up that high? I'd imagine the smaller engine would love to rev up there.
I'm going to go back to work but I need to get my behind on How Stuff Works and learn a thing or two.
Maudite, did the car produce power up that high? I'd imagine the smaller engine would love to rev up there.
I'm going to go back to work but I need to get my behind on How Stuff Works and learn a thing or two.
![Image](http://www.nightmajik.net/dadamsbanner.jpg)
I am, the most interesting man in the world.
that 'a boy!!DJones wrote:uhhhh Dave, that didn't make sense.![]()
...and to answer the question, you can clutch kick whenever you feel the need. There's no point in clutch kicking if your car is on the rev limiter, and if my car is at low revs, I will hold the clutch in a little longer to let the revs build more (so when something breaks, it breaks big)
![Laughing :lol:](./images/smilies/icon_lol.gif)
- Greg
- Muscle Milk
- Posts: 11575
- Joined: Tue Jan 24, 2006 8:05 pm
- Location: Seventh Circle Inner Ring.
- Contact:
LOL @martymartymarty.net.
Yeah Dave, I produced good NA power up there and awesome SCed power.
'99 1.8L balanced to 9K rpm, 10:75:1 compression, ported head and intake manifold, unshrouded valves and spark plugs, .003 decked head and block, stiffer valve springs, solid lifters, 8 pound flywheel, lightened crank pulley, lightened crank, micropolished crank journals, 4-1 RB header, 1 of 5 in the U.S PitCrew catback exhaust, Link ECU, custom cold air intake, high flow cat, plus the car only weighted 1900 pounds.
it was a crap ton of fun NA, it was a beast at 10PSI on the M45 SC, and it was fucking brutal on 13 psi with the M62 SC.
only thing i never got around to was boring the cylinders and upping the compression to 12.5:1.
gawd I miss that car. gotta get another one.
Yeah Dave, I produced good NA power up there and awesome SCed power.
'99 1.8L balanced to 9K rpm, 10:75:1 compression, ported head and intake manifold, unshrouded valves and spark plugs, .003 decked head and block, stiffer valve springs, solid lifters, 8 pound flywheel, lightened crank pulley, lightened crank, micropolished crank journals, 4-1 RB header, 1 of 5 in the U.S PitCrew catback exhaust, Link ECU, custom cold air intake, high flow cat, plus the car only weighted 1900 pounds.
it was a crap ton of fun NA, it was a beast at 10PSI on the M45 SC, and it was fucking brutal on 13 psi with the M62 SC.
only thing i never got around to was boring the cylinders and upping the compression to 12.5:1.
gawd I miss that car. gotta get another one.
Bikes, Meat, Drama, Meat, Gossip, Meat, Metal, Meat, Buttsex, Meat, Family and some Drifting.