KA-T day Two

General automotive discussion. If you can read and write... this is the place.

Moderators: andysapp, charlie, CodyW, darkducati

Post Reply
s14unimog
Fresh Meat
Posts: 83
Joined: Thu Oct 13, 2005 10:34 pm
Location: ATHENS...where your dreams come true!

KA-T day Two

Post by s14unimog »

So I requested dyno time at 4pm on Friday....today, and busted my ass all last night and today to get the car ready for the dyno. I get everything in but my injectors and lower heat range spark plugs. Drive the car up there hitting a max of 2150rpm. So needless to say i got there ok, pulled in, changed my injectors over and my spark plugs...call the guy out to give it alittle correction to get it over to the dyno and the car wont run. After a close look we figure out that 2 of the 4 injectors are not spraying....So basically my car was all set to go, on time, no kinks, ready for boost and my injectors were clogged! Fu*k, so now my untuned turbo 240 is sitting in my drive way and I am yet again forced to drive the 1.6 miata. So close yet so far away...


does anyone know who cleans side feed injectors around here?
slide to side world wide
SHIFTlock_life
KA-T 96 S14
User avatar
SteppinOut
Stale Meat
Posts: 203
Joined: Fri Oct 07, 2005 12:54 am
Location: Atlanta

Post by SteppinOut »

That really sucks. I know you were rushed to make that 4P deadline, and to have something as ridiculous as your injectors being clogged screw it up is really irritating!
Volvo is at 230.6K miles! Party when she gets to 250K!
User avatar
CodyW
Slippery When Westicles
Posts: 8581
Joined: Fri Apr 30, 2004 11:44 am
Location: emergency surgery in the studio
Contact:

Post by CodyW »

My siberian husky can clean them.
User avatar
CubanMike
Get Some
Posts: 953
Joined: Sat Jun 05, 2004 1:45 am
Location: Baghdad Special Stage

Post by CubanMike »

Yeah, Skye is really good at that! Best in town, is the word on the street.
Image
Grease Munkey Drift & Speed
GreaseMunkeyFC@yahoo.com
User avatar
icantdrift
Salsa Rodeo
Posts: 5987
Joined: Fri Sep 03, 2004 1:03 pm

Post by icantdrift »

http://www.deatschwerks.com sells reman'd higher flow nissan side feeds at good prices and gives you core money back for your stockers. might be a worthy upgrade since you need them and these guys are very reasonably priced.
User avatar
POOPscandal
Taco Bar Extraordinaire
Posts: 4360
Joined: Tue Dec 07, 2004 12:59 am
Location: !black emperor

Post by POOPscandal »

http://www.rceng.com/Default.htm

my endorsement goes to RC. always heard good stuff from them and was going to send the FC injectors there, but now they are chris' FC injectors and he can do with them as he pleases. but they do clean, balance, and blueprint.
Superb Tough Highest Performer Driven to Lifestyles Unimaginable
Image
:domo: :domo: :domo:PHOTOBLARG! :domo: :domo: :domo:NEW EXCITING BLARG! :domo: :domo: :domo:
"thanks man, I didn't do it, but I'm a fan of apple penis" - <3 internet
s14unimog
Fresh Meat
Posts: 83
Joined: Thu Oct 13, 2005 10:34 pm
Location: ATHENS...where your dreams come true!

Post by s14unimog »

Well I found this company which seems like a good idea so imight try them...

http://www.witchhunter.com/injectorserv1.htm

15 per injector to do everything to them
slide to side world wide
SHIFTlock_life
KA-T 96 S14
s14unimog
Fresh Meat
Posts: 83
Joined: Thu Oct 13, 2005 10:34 pm
Location: ATHENS...where your dreams come true!

Post by s14unimog »

I sent my injectors off to be cleaned and tested and hopefully i will get them sometime early next week. You couldn't have said it better Heather, It pisses me off that we got all the way to the dyno and I couldn't run. What sucks is that I was freaking out all that day trying to rush to get my car done when in the end i would just have missed it anyways, oh well at least the car is done.
slide to side world wide
SHIFTlock_life
KA-T 96 S14
Post Reply