electric fans

General automotive discussion. If you can read and write... this is the place.

Moderators: andysapp, charlie, CodyW, darkducati

User avatar
struka
Slippery When Westicles
Posts: 8263
Joined: Sat Oct 02, 2004 7:59 pm
Location: Rocketbrah

electric fans

Post by struka »

so i need to buy some electric fans, i been lookin at the flex-a-lite dual without the thermostat but its so expensive. you can get the universal one for like 250 ....
http://www.frsport.com/index.php?target ... ct_id=1218

or the one that is for 240s but they are like 300-390. wtf?
anyone know where i can get or if the ones for 250 will fit. my car isnt here so i cant measure it to see if they will.
User avatar
icantdrift
Salsa Rodeo
Posts: 5987
Joined: Fri Sep 03, 2004 1:03 pm

Post by icantdrift »

just get a pair of universal fans for half the price and call it done.
matts13
OK Finally Past the Hazing
Posts: 1925
Joined: Mon Jan 09, 2006 8:31 pm
Location: Woodstick

Post by matts13 »

i use fans from a sentra ser. got them for like 50 bucks.
User avatar
P.Haire
Trunk Junk
Posts: 14403
Joined: Mon Sep 27, 2004 8:13 pm
Location: ZOO
Contact:

Post by P.Haire »

yeah that's what i've heard to do.
Image
please believe
bighuyner
Imitation Crab Meat
Posts: 468
Joined: Sun Sep 05, 2004 10:54 pm

Post by bighuyner »

I recommend OEM electric fans over aftermarket ones. The fans are shrouded more properly. Also when wiring them, try to use 12-14ga wires.
User avatar
slidewaysgolf
Not Really Past the Hazing
Posts: 1360
Joined: Sun Aug 08, 2004 11:21 pm
Location: your mom!

Post by slidewaysgolf »

Image
User avatar
struka
Slippery When Westicles
Posts: 8263
Joined: Sat Oct 02, 2004 7:59 pm
Location: Rocketbrah

Post by struka »

bighuyner wrote:I recommend OEM electric fans over aftermarket ones. The fans are shrouded more properly. Also when wiring them, try to use 12-14ga wires.
i cant run that cuz not enough space. i have to have electric ones.
mikespeed95
Get Some
Posts: 970
Joined: Thu Sep 02, 2004 4:41 pm
Location: Huntsfail....TEXAS. Home of Dan Rather.

Post by mikespeed95 »

altima or taurus SHO fans work well too supposedly.
bighuyner
Imitation Crab Meat
Posts: 468
Joined: Sun Sep 05, 2004 10:54 pm

Post by bighuyner »

struka wrote:
bighuyner wrote:I recommend OEM electric fans over aftermarket ones. The fans are shrouded more properly. Also when wiring them, try to use 12-14ga wires.
i cant run that cuz not enough space. i have to have electric ones.
They are electric. What I meant is using OEM fans off of other vehicles are better than flexalites.
User avatar
struka
Slippery When Westicles
Posts: 8263
Joined: Sat Oct 02, 2004 7:59 pm
Location: Rocketbrah

Post by struka »

will those have enough cfm? (the altima or SHO)
mikespeed95
Get Some
Posts: 970
Joined: Thu Sep 02, 2004 4:41 pm
Location: Huntsfail....TEXAS. Home of Dan Rather.

Post by mikespeed95 »

i think so , honestly check on a 240 forum :-/
User avatar
icantdrift
Salsa Rodeo
Posts: 5987
Joined: Fri Sep 03, 2004 1:03 pm

Post by icantdrift »

struka wrote:will those have enough cfm? (the altima or SHO)

enough CFM for what? normal drifting, yes they will have plenty. crazy long demo type driving, maybe/maybe not.

a lot of people use the alty/taurus fans because they actually tend to flow more air than most aftermarket fan setups.
User avatar
Midtenn
Imitation Crab Meat
Posts: 456
Joined: Wed Nov 24, 2004 12:52 pm

Post by Midtenn »

Spal makes some really thin fans that pull some major CFM's.
<12 -- We really don't know what it means either.
marlow<12 wrote:Well the AE86 is <12's specialty, and <12 is awesome, so therefore the AE86 is awesome
bighuyner
Imitation Crab Meat
Posts: 468
Joined: Sun Sep 05, 2004 10:54 pm

Post by bighuyner »

Midtenn wrote:Spal makes some really thin fans that pull some major CFM's.
Most 240sx's I've seen have huge gap between motor and radiator. I don't think he needs something thin. Unless he has a V8 or a inline 6.

Altima's come with KA24DE's too. Taurus's have 3.0L V6's.
User avatar
andysapp
I need to go outside
Posts: 29034
Joined: Wed Apr 07, 2004 5:07 pm
Location: KILL 'EM ALL.

Post by andysapp »

Image
Post Reply